home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Magnum One
/
Magnum One (Mid-American Digital) (Disc Manufacturing).iso
/
d20
/
mt320.arc
/
MT.DOC
< prev
next >
Wrap
Text File
|
1991-08-10
|
46KB
|
1,086 lines
MsgTrack 3.20
August 11, 1991
USER MANUAL
Copyright (c) 1989-1991 Andrew D. Farmer.
All Rights Reserved.
License Statement
The MsgTrack package is protected by both Canadian copyright
law and international treaty provisions.
MsgTrack is provided as is, without warranty of any kind,
either expressed or implied. Andrew D. Farmer only
guarantees that MsgTrack will occupy disk space.
In no event shall Andrew D. Farmer be liable to you or
anyone else for any damages, including any lost profits,
lost savings or other incidental or consequential damages
arising out of the use or inability to use this program.
All Andrew D. Farmer products are trademarks or registered
trademarks of Andrew D. Farmer.
------------------------------------------------------------
The noncommercial version of MsgTrack does not offer as many
'toys' as the commercial version, but it is =not= crippled,
nor does it quit working after a period of time. It is
fully functional as provided.
The noncommercial version is yours to keep. It is not public
domain, shareware or freeware, it is simply free of charge.
You can use it as long as you do not use it within a
commercial environment. It doesn't matter if you are
making money by using it or not, if you are using it within
commercial walls, you must purchase the commercial version.
If you wish to purchase the commercial version, see the file
MT_ORDER.EUR (for europeans only) or MT_ORDER.ALL. Both of
these files should have been located in the compressed file
MT_ORDER.ARJ, within the distribution archive.
------------------------------------------------------------
Chapter 1
Preface
1.1 Archive
The program archive, MT320.ARJ, should have included the
following files:
MT.DOC - User manual.
MT.EXE - Main program.
MTSETUP.EXE - Setup program.
MTLOG.EXE - Log analyzer.
MT320.NEW - Release notes.
MT_ORDER.ARJ - Order forms for the commercial version.
1.2 System requirements
Although it is possible to run MsgTrack on a system with
less than the following equipment, the following should be
considered the realistic minimum with which you can get by:
A 100% IBM BIOS compatible computer system with at least
256K of available RAM.
MS-DOS or PC-DOS version 3.10 or greater.
1.3 AFI environment variable
MsgTrack will expect to find its configuration data files in
the DOS current directory or the directory pointed to by the
AFI environment variable.
1.4 AFIOPT environment variable
By default MT uses 'smart' (int 21h, function 60h) path
resolution code. Under some configurations, this actually
returns an unuseable pathspec. Setting AFIOPT=LOTEK_RES
tells MT to use 'dumb' or 'lotek' path resolution code
(this consists of resolving ambiguous paths to absolute
paths, but not doing any internal remapping).
1.5 TZ environment variable
MsgTrack uses the TZ environment variable to calculate
Universal Coordinated Time (UTC).
Examples: TZ=EST05EDT TZ=AEST-10 TZ=GMT00 TZ=UTC0
1.6 Key
The commercial version requires a key file for operation.
Chapter 2
Setup
The setup program, MTSETUP.EXE, is the backbone of MsgTrack.
This full screen, menu driven, module is what you use to
create and edit MsgTrack's configuration data files.
2.1 Video mode / command line syntax
MTSetup will attempt to automatically use the correct video
mode for your system, unfortunately some BIOSs return bogus
information. For that reason two command line options are
available to you: -M will force MTSetup to use Mono video
and -C will force MTSetup to use Colour video.
Note: MTSetup uses direct screen writes. If it detects
DESQview, it will use the DV shadow buffer.
2.2 Errorlevels
There are only 2 possible ErrorLevels that MTSetup can exit
with. Errorlevel 1 indicates a fatal error and Errorlevel 0
indicates successful completion.
2.3 Menus
There are 6 top level (pull down) menus. The settings
available on the first 5 will be explained in this section.
The 6th top menu, Managers, is explained in section 2.4.
2.3.1 File
Copyright This displays program identification
and copyright information. It will
stay on the screen for 3 seconds, or
until a key is pressed.
Export This allows you to export your
MsgTrack configuration data to a
plain ASCII text file.
Password If a password is specified, all
subsequent attempts to access
MTSetup will require that the
correct password to be provided.
DOS Shell This spawns a command shell using
ComSpec. When you type EXIT to
return to MTSetup, it will change
directories back to where you were
when you loaded MTSetup.
MTSetup will automatically attempt
to swap itself out of memory, when
spawning. It will first attempt to
swap to EMS, if that fails it will
try for a swap to disk and if that
also fails, it will spawn without
swaping.
You can also Shell to DOS by typing
ALT-Z at any keyboard input field.
Exit/Save This causes MTSetup to quit and exit
back to DOS. If you have made
changes to your configuration, then
you will be asked whether you wish
to save the changes.
You can also Exit/Save by typing ESC
at any top level keyboard input field.
2.3.2 General
Address
Network Address These are your network addresses
(upto 20).
Private Network This is your private network number,
if any.
Domain Matching This is a table of upto 30 domain
names that should be mapped to a
specific zone number.
Sysops These are your names (upto 5).
You can also choose whether or not
any messages addressed to an alias
(names 2-5) should be renamed so
that they are to your primary name.
Paths
NetMail This is the path to your network
mail area.
BadMail This is the path to your bad mail
area. This is where MsgTrack will
place bad messages.
Paths
Inbound This is the path to your mailer's
inbound files area.
SentMsgs This is the path that you wish
MsgTrack to place Sent message into.
If not specified, the BadMail path
will be used.
RcvdMsgs This is the path that you wish
MsgTrack to place Received message
into. If not specified, the BadMail
path will be used.
Nodelist This is the path to your nodelist
directory. This is where MsgTrack
will place, and expect to find, its
nodelist index file (MSGTRACK.IDX).
Semaphore This is where MT will look for and
place semaphore files, such as the
FrontDoor rescan files.
Nodelists This is where you enter the names of
your raw nodelist files (upto 10).
This must include the complete path
to the files.
If you do not specify a file type
(extension) MsgTrack will use the
most recent file matching the trunk
name.
You can also choose whether or not
nodes marked 'DOWN' should be
included in the compiled index.
Log Info
Log File This is the path and name of the
file that you wish MsgTrack to use
for its log. If this is not
specified then there will be NO log.
Log Data This sub-menu allows you to select
what actions your wish to have
placed in the log file. Here is a
brief run-down of the action types:
Fatal Errors are errors causing
abortion of MsgTrack.
Log Info
Log Data Other Errors are non-fatal errors.
Major Actions are items such as
"Bounce Return Message sent to
xxx/xxx", "NetMail #6 relocated to
BadMail #4", "NetMail #5 Deleted".
Routine Actions are items such as
"Tracking, 1:163/115 -> 2:512/1".
Message Info lines provide
additional information about
messages affected by Routine
Actions. They contain the To Name,
From Name and Subject line of the
message being processed.
Runtime Status lines list the number
of messages that MsgTrack scans in
the area and the amount of RAM
available for internal buffering.
Trivial Messages are items such as
'Renumbering' and 'Total of XX
nodes compiled into index'.
Extended Debug logging is only
useful to the author. Turning this
selection on will not have any
effect unless authorized by the
author.
Log Format This sub-menu allows you to select
which of the four available log
format types you wish to have used.
2.3.3 Handling
Attribute Bits
Strip Crash This causes MsgTrack to remove the
Crash and Hold bits from all pass-
through messages. You can make
exceptions to this, see section
2.4.3.
Strip Attach This causes MsgTrack to remove the
Attach bit from all passthrough
messages. You can make exceptions
to this, see section 2.4.3.
Attribute Bits
Strip Transit This causes MsgTrack to remove the
In-Transit bit from all passthrough
messages. You can make exceptions
to this, see section 2.4.3.
Strip Kill This causes MsgTrack to remove the
Kill/Sent bit from all passthrough
messages. You can make exceptions
to this, see section 2.4.3.
Add Private This causes MsgTrack to add the
Private bit to all passthrough
messages.
Strip Freq This causes MsgTrack to remove the
XX2, FileRequest, ReceiptRequest,
Receipt, Audit and UpdateRequest
bits from all passthrough messages.
Miscellaneous
Strip Flags This causes MsgTrack to remove the
FLAGS handling kludge from all
passthrough messages. You can make
exceptions to this, see section
2.4.3.
This action will be ignored if the
Attach bit is set.
Stop Wild Att This causes MsgTrack to remove the
Attach bit from passthrough msgs, if
(and only if) the attached filespec
includes wildcard characters.
Clear Cost This causes MsgTrack to reset the
Cost field in the msg header to zero
(0) on all passthrough messages.
2.3.4 Actions
NodeList Lookup
Check NodeList This tells MsgTrack to check through
the nodelist index for the Origin
and Destination Address on each msg.
If the address is not found, the
message will not be forwarded.
If this is not turned on, none of
the other NodeList Lookup functions
will be operative.
NodeList Lookup
Only My Zone This tells MsgTrack to only confirm
the existence of the Zone, not the
Net and Node, for addresses outside
of your primary Zone.
Skip Node Level This tells MsgTrack not to check the
Node address, only the Zone and Net,
for addresses outside of your net.
Return Bad Dest This tells MsgTrack to Return
messages with unknown destination
addresses to the sender.
The text for the return message may
be specified in BAD_DEST.MTB (in
the AFI env dir). If this file is
not present, default text will be
used.
Warn Bad Orig This tells MsgTrack to warn the
recipient if the origin address on
the message is unlisted.
Hold Bad Orig This tells MsgTrack to move any
message with an unknown origin
address to BadMail (or, delete it if
the following option is used).
Kill Failed Msgs This tells MsgTrack to delete
messages that failed the Nodelist
lookup, instead of moving them to
the BadMail area.
EchoMail Handler
Bounce EchoMail This tells MsgTrack to disallow
routed EchoMail. You can make
exceptions to this, see section
2.4.3.
If this is not turned on, none of
the other EchoMail Handler functions
will be operative.
Return to Sender This tells MsgTrack to Return routed
EchoMail messages to the sender.
The text for the return message may
be specified in ECHOMAIL.MTB (in
the AFI env dir). If this file is
not present, default text will be
used.
EchoMail Handler
Kill Failed Msgs This tells MsgTrack to delete routed
EchoMail messages, instead of moving
them to the BadMail area.
Bad UUCP Handler
Bounce Bad UUCP This tells MsgTrack to bounce
messages that are addressed to UUCP
on your system, but do not contain
a valid TO: routing line.
This option is only useful to those
running a FidoNet<->UUCP gateway.
If this is not turned on, none of
the other Bad UUCP Handler functions
will be operative.
Return to Sender This tells MsgTrack to Return bad
UUCP messages to the sender.
The text for the return message may
be specified in BAD_UUCP.MTB (in
the AFI env dir). If this file is
not present, default text will be
used.
Kill Failed Msgs This tells MsgTrack to delete bad
UUCP messages, instead of moving
them to the BadMail area.
Send Copies You may enter a list of upto 5
addresses where you wish messages
addressed to you to be copied.
MsgTrack treats a message as being
addressed to you if it is addressed
to one of the names listed under
Sysops (see section 2.3.2) at one of
your addresses (see section 2.3.2).
You may additionally specify whether
or not the original message should
be deleted after it has been
processed by Send Copies.
2.3.5 Miscellaneous
Action Settings
Bounce Local Msgs This tells MsgTrack to apply all
configured 'bounce' tests against
locally entered messages (mail
to/from your system), as well as
to passthrough mail.
Action Settings
Ignore Zones This tells MsgTrack to ignore Zone
numbers during all address lookups.
Move Sent Msgs This tells MsgTrack to move msgs
marked 'Sent' to the SentMsgs area.
Move Rcvd Msgs This tells MsgTrack to move msgs
marked 'Rcvd' to the RcvdMsgs area.
Gate INTL Mail This tells MsgTrack to Zonegate
route any Inter-Zone messages that
are not already Zonegated.
UnGate INTL Mail This tells MsgTrack to remove Zone-
gate routing on Inter-Zone messages.
Keep Bounce Msgs This tells MsgTrack not to mark any
of the return messages, associated
with bouncing mail, as Kill/Sent.
FrontDoor Rescan This tells MsgTrack to force
FrontDoor (mailer/editor) to rescan
the NetMail area if any changes have
been made to the contents.
Renumber NetMail This tells MsgTrack to renumber the
NetMail area.
You can also cause multiple areas
to be renumbered by using the
-R<file> command line option.
Full Screen Mode This tells MsgTrack to operate in
Full Screen mode, instead of BIOS
scroll mode.
Force INTL Line This tells MsgTrack to place an
INTL line into =all= messages.
Process Packets This tells MsgTrack to unpack any
mail packets (*.PKT files) that are
in your Inbound area.
Kill Inbound Freq This tells MsgTrack to delete any
message that is addressed to your
system and has the File Request or
Update Request attribute bit set.
Colour Choices
Customized This allows you to manually select
what colours MsgTrack will use while
operating in Full Screen Mode.
Colour Choices
Default mono set This tells MsgTrack to use its
default monochrone colour set while
operating in Full Screen Mode.
Default colour set This tells MsgTrack to use its
default CGA/EGA/VGA colour set while
operating in Full Screen Mode.
2.4 Managers
The managers allow you to control MsgTrack's powerful Point,
Node, Exceptions and Routing handling functions. All four
managers will now be explained.
2.4.1 Point Manager
The Point Manager is a complete Point management interface.
It allows you to specify upto 500 points and fully control
what actions will be taken on each.
Note that nothing you do in the Point Manager will become
permanent until you exit and save your changes.
2.4.1.1 Wildcard macros
When entering a name, you may specify an asterix (*) at the
end of the name. This will cause a strict match only to be
made upto that point in the string, escentially wildcarding
the tail end of the string.
Example: Using "Andre*" would cause a match with "andrew
farmer", "Andre Gagnon" or "Andrea Johnson".
2.4.1.2 Keystroke actions
Enter Edit an existing entry.
F1 Toggle the active status of the
current entry. If the active status
is set to no, then the entry will be
ignored.
F2 Toggle the Mapping method. This can
be set to either Point or PvtNet.
If set to Point, mail for that point
will be addressed using a fully
qualified 4-dimensional address. If
set to PvtNet, mail for that point
will be addressed using a 3-
dimensional private network address.
F3 Global settings:
If 'Map from Pvt Net' is set to yes,
then any mail that originates in
your private network will be
remapped to show a fully qualified
4-dimensional origin address.
If 'Files to Points' is set to yes,
then mail addressed to your points,
that also has the Attach bit set,
will have your Inbound path inserted
as the 'attach path' for the file.
F4 Export your Point Manager config to
a flat ASCII file.
Ins Insert a new entry.
Del Delete an existing entry.
Esc Exit/Save.
2.4.2 Node Manager
The Node Manager is a complete Node management interface.
It allows you to specify upto 500 addresses, or user names,
whose mail you wish to have readdressed to a different
destination.
Note that nothing you do in the Node Manager will become
permanent until you exit and save your changes.
2.4.2.1 Wildcard macros
When entering a name, you may specify an asterix (*) at the
end of the name. This will cause a strict match only to be
made upto that point in the string, escentially wildcarding
the tail end of the string.
Example: Using "Andre*" would cause a match with "andrew
farmer", "Andre Gagnon" or "Andrea Johnson".
2.4.2.2 Select menu
A note about the 'Select' menu that will pop up whenever you
hit Enter or Ins.
If you select 'UserName' then you will be asked to enter a
username followed by the node where that user's mail should
be sent. Note that only mail addressed to the specified
user AT ONE OF YOUR ADDRESSES will be processed in this
case.
If you select 'Address' then you will be asked to enter a
network address followed by the node where the mail should
be readdressed.
The default display screen will show an at sign (@) in front
of all entries where you have selected 'Address'.
2.4.2.3 Keystroke actions
Enter Edit an existing entry.
F1 Toggle the active status of the
current entry. If the active status
is set to no, then the entry will be
ignored.
F4 Export your Node Manager config to a
flat ASCII file.
Ins Insert a new entry.
Del Delete an existing entry.
Esc Exit/Save.
2.4.3 Exceptions Manager
The Exceptions Manager is a complete Exceptions management
interface. It allows you to specify upto 500 addresses
(wildcards are allowed, read on) that should be excepted
from 'Strip Crash', 'Strip Attach', 'Strip Kill/Transit',
'Strip Flags' and/or 'Bounce EchoMail' actions.
Note that nothing you do in the Exceptions Manager will
become permanent until you exit and save your changes.
2.4.3.1 Wildcard macros
When entering an address, you may specify an asterix (*) in
any, or all, address portions (the 4 valid address portions
are: Zone, Net, Node and Point).
Note that wildcarding will auto-flow in a greater to lesser
direction. That means that if you specify an asterix in the
Net position, Node and Point will also be wildcarded.
For example:
Entering 1:163/* will cause any node in Zone 1, Network
163, plus all point under them, to be excepted from the
specified actions. This would be displayed on the
default screen as 1:163/All.All.
Entering 3:*/* will cause any node/point in Zone 3 to be
excepted from the specified actions. This would be
displayed on the default screen as 3:All/All.All.
Entering 1:163/115.* will cause all points of 1:163/115
to be excepted from the specified actions. This would
be displayed on the default screen as 1:163/115.All.
2.4.3.2 Keystroke actions
Enter Edit an existing entry.
F1 Toggle the active status of the
current entry. If the active status
is set to no, then the entry will be
ignored.
F2 Select Origination exceptions. These
are the actions that the specified
address(es) should be excepted from
if the message is FROM them.
F3 Select Destination exceptions. These
are the actions that the specified
address(es) should be excepted from
if the message is FROM them.
F4 Export your Exceptions Manager
config to a flat ASCII file.
Ins Insert a new entry.
Del Delete an existing entry.
Esc Exit/Save.
2.4.4 Routing Manager
The Routing Manager is a complete Routing management
interface. It allows you to specify upto 500 addresses
(with user names if you wish), whose mail you will not
route.
You may further select to disallow mail FROM this
address/name, mail TO this address/name or go hog wild and
disallow mail that is either FROM or TO this address/name.
Note that nothing you do in the Routing Manager will become
permanent until you exit and save your changes.
2.4.4.1 Wildcard macros
When entering an address, you may specify an asterix (*) in
any, or all, address portions (the 4 valid address portions
are: Zone, Net, Node and Point).
Note that wildcarding will auto-flow in a greater to lesser
direction. That means that if you specify an asterix in the
Net position, Node and Point will also be wildcarded.
For example:
Entering 1:163/* will cause any node in Zone 1, Network
163, plus all point under them, to be excepted from the
specified actions. This would be displayed on the
default screen as 1:163/All.All.
Entering 3:*/* will cause any node/point in Zone 3 to be
excepted from the specified actions. This would be
displayed on the default screen as 3:All/All.All.
Entering 1:163/115.* will cause all points of 1:163/115
to be excepted from the specified actions. This would
be displayed on the default screen as 1:163/115.All.
2.4.4.2 Keystroke actions
Enter Edit an existing entry.
F1 Toggle the active status of the
current entry. If the active status
is set to no, then the entry will be
ignored.
F2 Select your DisAllow value. It may
be set to NONE, TO, FROM or BOTH.
F3 Global settings:
If 'Return to Sender' is set to yes,
then any mail that is bounced on a
routing violation will be returned
to the sender.
If 'Kill Failed Msgs' is set to yes,
then any mail that is bounced on a
routing violation will be deleted,
instead of being relocated to the
BadMail area.
F4 Export your Routing Manager config
to a flat ASCII file.
Ins Insert a new entry.
Del Delete an existing entry.
Esc Exit/Save.
Chapter 3
MsgTrack
The main program, MT.EXE, is ready to run once you have
configured with MTSetup and placed SYSTEM.MT (plus MT.KEY,
POINTSYS.MT, NODESYS.MT, EXCEPSYS.MT and ROUTESYS.MT if
applicable) into one of the directories where MsgTrack will
look for them (see section 1.3).
3.1 Video mode
When operating in Full Screen mode, MsgTrack uses direct
screen writes. When operating in Scroll mode, MsgTrack
writes to the screen using calls to the undocumented BIOS
interrupt 29. In both cases output in =not= redirectable.
Note: If MsgTrack detects DESQview, any direct screen
writes will be done via the DV shadow buffer.
3.2 Command line syntax
MsgTrack can be executed without any command line options,
but a number of specialized features are available from the
command line. Command line switches may be preceded with
either a dash (-) or the currently configured DOS switch
char (normally a forward slash).
Syntax/Usage: MT <optional switches>
-? This will cause MsgTrack to display
a Syntax/Usage screen, then abort
with nothing Done.
-A By default, MsgTrack will NEVER
process message from ARCmail or
Tick on your system. This switch
will override that default.
-D When used with -P, this will cause
the file(s) to be deleted after
being posted.
-F This will force MsgTrack to compile
its NodeList Index, even if no
compile is necessary, then abort
with nothing else done.
-L This will cause MsgTrack to NEVER
bounce locally entered messages.
-Mdir This will cause MsgTrack to scan the
path specified by 'dir', instead of
the NetMail area specified in your
configuration.
-N By default, MsgTrack will will
automatically re-compile its
NodeList index if it judges that a
compile is necessary. Using this
switch will 'short circuit' the
auto-compile logic, telling MsgTrack
to use the existing Index file, even
if it is out-of-date.
-Pfile This will cause MsgTrack to post the
file(s) specified by 'file' as msgs
in your NetMail area. 'file' can
include wildcards characters.
-Q This will cause MsgTrack to run in
Quiet mode, providing only minimal
screen output.
-R<file> This will cause MsgTrack to renumber
the NetMail area, then exit with
nothing else done.
The optional <file> is a raw ASCII
text file listing one directory path
per line. If this is specified,
then MsgTrack will renumber all
directories listed therein.
-S This causes MsgTrack NOT to include
the Subject line in 'Message Info'
log enties.
-Tlogfile This tells MsgTrack to use the
path/filename specified by 'logfile'
for its log, instead of the log file
specified in your configuration.
3.3 Errorlevels
The following is a run-down of the 4 possible ErrorLevels
that MsgTrack can exit with:
Errorlevel 3 MsgTrack processed some messages.
Errorlevel 2 Fatal Error - program abortion.
Errorlevel 1 Fatal Error - program abortion.
Errorlevel 0 Successful completion.
Chapter 4
Log Analyzer
The log analyzer, MTLOG.EXE, is a small utility program
that will take as input a MsgTrack log (wildcards are
valid, so you can process multiple logs in one pass) and
output a report file.
4.1 Report
The report file consists of 3 sections.
The Activity report lists the total number of times a
particular action was executed.
The From report lists msgs/bytes that were FROM a specific
address, no matter what the destination address was.
The To report lists msgs/bytes that were TO a specific
address, no matter what the origination address was.
4.2 Video mode
MTLog uses Standard Output for screen writes.
4.3 Command line syntax
MTLog must be executed with two (2) command line options.
Syntax/Usage: MTLog [LogFile] [Report]
LogFile This is the MT logs(s) you wish to
process. Wildcards are valid.
Report This is the path/filespec MTLog
should write its report file to.
Note that MTLog will OVERWRITE any
existing file by this name.
4.4 Errorlevels
The following are the 2 possible ErrorLevels that MTLog can
exit with:
Errorlevel 1 Fatal Error - program abortion.
Errorlevel 0 Successful completion.
Appendix A
Program support - Help nodes
If you have any questions, concerns or reports of unexpected
behavior in the software, the author can be contacted in the
following ways:
Electronic:
FidoNet: 1:163/115
Internet: adf@aficom.ocunix.on.ca
Surface:
Andrew D. Farmer
P.O.Box 11087, Station H
Nepean, Ontario
K2H 7T8 CANADA
Inquiries and questions about installation or operation may
also be addressed to the following help nodes:
Europe: Noel Bradford
London, UK
2:257/102@fidonet
Peter Janssens
Venray, Netherlands
2:512/1@fidonet
North America: Bruce Bodger
Tulsa, Oklahoma
1:170/400@fidonet
Appendix B
Thanks for all the fish...
I would like to take this opportunity to thank all the
people that helped to make MsgTrack 3.20 what it is. They
tested the pants off it, they contributed many excellent
feature ideas and, above all, they are a great bunch of
people who deserve extra credit for putting up with my
attitude. <grin>
I present my Beta Testers (alphabetically):
Bruce Bodger, Noel Bradford, Orlando Castillo, David Dodell,
Tom Hall, Jesse Hollington, Mark Howard, Dave Hunter,
Peter Janssens, Felix Kasza, Joop Mellaart, George Peace,
James Smith, Dieter Soltau, John Souvestre, Ken Wilson.
Special thanks go to Joaquim Homrighausen, for a host of
reasons.
Closing comments
I have tried to make this documentation as complete as
possible, but there are always some small things that slip
through the cracks and aren't documented, or aren't
documented correctly. I apologize in advance for any such
errors that may occur.
I hope that you enjoy using MsgTrack and that it provides
you with the features you need to keep control of your
NetMail area.
MsgTrack is still very much 'in development' and I am always
open to feature suggestions, so please feel free to let me
know if you have some ideas that would make MsgTrack even
better.
Andrew D. Farmer
Ottawa, Ontario
August 11, 1991
